Materials

We are the only representative of MAGRIS company in Poland. They produce high quality plate chains applied for conveyor constructions and suitable for various applications in many branches of industry.

The MAGRIS chains are produced with high quality steel/stainless steel i order to satisfy the growing needs of technological progress in the conveyor sector.

Materials used for production of steel chain

SLATS

HARD INOX

Special work hardened, chrome-nickel, highly wear and corrosion resistant stainless steel. It has excellent mechanical characteristics and exceptional sliding properties, due to a very low surface roughness.
It is particularly suitable for the critical points of the bottling lines.
Material used for the Super, Flex RXMS, Flex FMS, Flex FMS2, New Flex Mag, Super-G, Flex RXMS-G, New Flex Mag-G models.

INOX

Ferritic, AISI 430 stainless steel, work hardened by cold-rolling, with good corrosion resistance. It has an excellent surface finishing with low roughness, a remarkably important quality for the sliding of the conveyed products.
It is used in standard bottling industry applications.
Material used for the Special, Standard, Flex RXMC models.

HQ INOX (HIGH QUALITY)

Special, new, chrome-nickel (W.1.4589) stainless steel, work hardened. It has been developed in cooperation with a major stainless steel manufacturer for very special applications such as pressureless combiners/inliners. Cold rolled to extremely high quality standards, this new material has unique features:

• exceptional surface finishing and flatness,
• very high working load and wear resistance.

The right answer to the most sophisticated needs.
Material used for the Superspeed, Wear-Proof, Flex FMD, New Flex Mag-D models.

INOX 18/8

Austenitic and non-magnetic AISI 304 stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance.
It provides excellent resistance to chemical agents and corrosion.
It has excellent mechanical and duration characteristics.
It is particularly used in the preservation and bottling industry.
Material used for the Stella D., Flex RXM, Flex FM, Flex FM2 models.
*** Approved by the Food and Drug Administration (FDA), American Government Organization for the direct contact with foodstuffs.

INOX 316

CARBON STEEL

Heat-treated carbon steel with a surface and core hardness of 43 HRC. It is particularly suitable for high working loads and is highly resistant to wear. It is used in the glass, ceramic and general product conveying industry.
Material used for the Accate, Flex RXMA models.
*** For difficult applications and with abrasive dust, upon request, the Carbon Steel can be case hardened, reaching a surface hardness of 55 HRC and a core hardness of 40 HRC.

PINS

In the Special, Standard, Super, Super-G, Stella D., Flex RXMC, Flex RXMS, Flex RXMS-G, Flex FMS, Flex FMS2, Flex RXM, Flex FM, Flex FM2 models the pins are made of austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high resistance.
In the Wear-Proof, Superspeed, Flex FMD, New Flex Mag, New Flex Mag-D, New Flex Mag-G models the pins are made of magnetic stainless steel AISI 431, 400 series, work hardened for high resistance.
In the 316, Flex RXM 316 models the pins are made of austenitic AISI 316 stainless steel. In the Accate, Flex RXMA models the pins are made of case hardened carbon steel.
N.B.: Upon request, we can produce all our chains with other types of stainless steel.